GhostingTest
-- Hz · --.-- ms
1. Sensor (Hz): Move cursor in fast circles inside the pad. 2. Switches & Side 4/5: Click anywhere in this panel — Back/Forward navigation is locked so Side 4 & 5 count safely.
LIVE POLLING RATE 0 Hz -- ms sensor interval
PEAK POLLING & CPS 0 Hz · 0 CPS Last click gap: -- ms
SWITCH BOUNCE FAULTS 0 Hardware fault under 20 ms
SCROLL ENCODER 0 / 0 Up / Down · 0 glitches
TEST AREA: CIRCLE FOR HZ · CLICK ANY BUTTON (LMB/RMB/MMB/SIDE 4-5) · SCROLL WHEEL X:0 Y:0
LMB RMB MMB
SOL (LMB) 0
ORTA (MMB) 0
SAĞ (RMB) 0

Mouse Polling Rate (1000Hz–8000Hz) & Microswitch Bounce Test

GHOSTINGTEST.COM // USB POLLING & MICROSWITCH TELEMETRY
01

How to Saturate 4000Hz & 8000Hz Polling

High-polling wireless and wired mice only transmit at 4000Hz or 8000Hz when the sensor registers continuous pixel movement. Set your mouse to 1600 DPI or higher and draw fast circles inside the test pad.

02

Detecting Double-Click Microswitch Faults

Degraded mechanical switches produce unintended secondary clicks faster than human finger speed (under 20 ms). Click LMB, RMB, MMB, and Side 4/5 repeatedly to catch intermittent bounce faults.

03

Safe Side 4 & Side 5 Button Testing

Normally, clicking your thumb buttons triggers browser Back or Forward navigation. This module traps both history directions so your SIDE 4 and SIDE 5 clicks register cleanly on the right-hand switch table.

04

Scroll Wheel Encoder Glitch Detection

Scroll smoothly in one direction inside the test pad. If a dirty rotary encoder sends an opposite-direction tick within 65 ms, the Scroll Encoder card highlights a reverse glitch warning.